When you enter the correct password, the system displays the privileged-level system prompt (#): Router# For security purposes, the password is not displayed. Step 2 Enter the password (the password is case sensitive). The EXEC prompts you for a privileged-level password as follows: Router> enable Step 1 At the user-level EXEC prompt, enter the enable command. At the console terminal, use the following procedure to enter the privileged level: The system prompt for the privileged level ends with a pound sign (#) instead of an angle bracket (>). The system prompts you for a password if one has been set. You must enter the privileged level of the EXEC command interpreter with the enable command before you can use the configure command to configure a new interface or change the existing configuration of an interface. You modify the configuration of your router through the software command interpreter called the EXEC (also called enable mode). ![]() ATM Configuration Examples Using the EXEC Command Interpreter.This chapter contains the following sections: ![]() Minor differences among the platforms-with Cisco IOS software commands-are noted. The instructions that follow apply to all supported platforms. To continue your PA-A1 ATM port adapter installation, you must configure the ATM interfaces.
0 Comments
Leave a Reply. |